OP50 Input Shaft Drilling and Pinning
1. Purpose: To drill and pin the input shaft and torsion bar.
2. Compatible Products: XK507C, JLFC3C, SP232C.
3. Equipment Specifications: 1800mm(W) x 1600mm(L) x 2000mm(Aluminum Profile H).
4. Equipment Technical Parameters
4.1 Equipment Power: 20kw.
4.2 Air Source: ≥ 0.5Mpa Oil-free, Water-free Clean Compressed Air Source. Air Consumption: 10 liters/min.
4.3 Equipment Operation Mode: Product loading/unloading is performed by the operator (manual), automatic pin feeding, automatic completion of workpiece drilling, and pin insertion.
4.4 Press Force Monitoring: Range 30KN, Accuracy 1%R.O; Pressure retention time no less than 3 seconds; Bearing and screw lifespan ≥ 10 million cycles.
4.5 Press-in Depth Control: Accuracy 0.02mm; Equipped with self-displacement control and can be connected to a high-precision displacement sensor.
4.6 Press-Fit Judgment: Whether the pressure and displacement are within the qualified range.
4.7 Model Changeover: The tooling fixtures to be replaced are placed below the equipment, with a specially manufactured placement tray.
Premium download
Subscribe to access all premium projects, a good reference data source for your engineering design.
