Cable Testing Machine

**Equipment Overview:**
This experimental device simulates the operating conditions of flat elevator cables within the elevator shaft, with a single test designed for 5 million cycles. The device is equipped with a built-in programmable control system, a touch screen control panel, and a controllable servo motor motion mechanism, allowing for acceleration and deceleration during testing. It can perform bending tests on flat elevator cables with bending diameters of 3000mm and 1000mm according to standards.

**I. Main Technical Parameters of the Equipment**

1. The actual occupied area of the equipment is 2.5m in width, 3.5m in length, and 7.0m in height.
2. The equipment structure is a steel structure tower type.
3. The equipment uses a synchronous belt guide rail with servo motor transmission.
4. Panasonic servo motor with a power of 3KW.
5. The effective vertical test travel is 4 meters, with approximately 20 meters of cable used for testing.
6. The distance from the fixed end to the movable end is adjustable between 300-1000mm.
7. The sample speed is 10 meters/second.
8. The testing method is a vertical U-shaped test, with a test voltage of DC24V. It includes a device for stopping operation upon disconnection or reaching the set number of cycles, and a breakpoint reminder display function.