Op220+op230 Ecu and Motor Assembly Station

OP220+OP230 ECU and Motor Assembly Station,
1. Purpose: To assemble the ECU, wiring harness, etc. onto the motor using screws
2. Compatible Products: A13TE, FE-3DA, ZTM11E
3. Equipment Specifications: 2000mm(W)x1500mm(L)x2000mm(H)
4. Production Cycle: ≤50s
5. Equipment Technical Parameters
5.1 Equipment Power: 5kw;
5.2 Air Source: ≥0.5Mpa clean, oil-free, and water-free compressed air source. Air Consumption: 3L/min.
5.3 Equipment Operation Mode: Product loading/unloading is performed by the operator (manual), assembly work is completed by the operator (manual)
5.4 Electric Tightening Wrench Accuracy: ±5% Nm
5.5 Qualification Criteria: Bolt tightening torque must be within the required range;
6. Control Points: Fixture error-proofing; error-proofing for missed tightening (torque gun torque feedback); detection marker pen point inspection; manual wrench confirmation