Electronic Display Vernier Caliper Dispenser

Electric Card Point Glue Pressing Equipment Technical Requirements
1. Workbench: a. The workbench of the point glue pressing equipment is disc-type, centrally aligned, and can rotate circumferentially.
b. The perimeter of the disc workbench is evenly arranged with 6 pressing clamps (for 6 position operation). The workbench can automatically lock every 60 degrees of rotation to maintain a stopped state, and unlocking is manually controlled.
2. Caliper Point Glue Machine, Automatic Glue Clamping Fixture: The clamp pressing surface is made of soft rubber, with a semicircular pressing cross-section, ensuring the flexible surface can spread glue from the center to both sides.
3. Glue Valve: The glue valve is suitable for instant adhesive (Loctite 480), with adjustable dispensing quantity. The glue needle must not clog within 2 hours after spraying. A small liquid container is fixed on the workbench, allowing the glue needle to be immersed in liquid after use, preventing the glue inside the needle from solidifying.

Electronic Vernier Caliper Glue Dispenser